Hole
Add holes with options for counterbore, countersink, slots, and threading
Keyboard shortcut: H
Overview
The Hole tool creates precise cylindrical holes on flat faces. Choose from simple holes, counterbores, countersinks, slots, or dowel holes. Position holes by clicking on the face or entering exact coordinates.
Parameters
| Parameter | Description | Default |
|---|---|---|
| Hole Type | The style of hole to create | Simple |
| Diameter | The hole diameter | 0.25 in |
| Depth | How deep to drill (or Through All) | Through All |
| Through All | Drill completely through the part | On |
| Drill Point | Shape of the hole bottom (blind holes only) | Cone |
| Drill Angle | Angle for angled drill point | 45° |
| Threaded | Add internal threads | Off |
| Position X/Y | Hole position relative to face origin | Center |
How to Use
1
Select a face
Click on a flat face where you want the hole.
2
Choose hole type
Select Simple, Counterbore, Countersink, Slot, or Dowel.
3
Set diameter
Enter a diameter or select a standard size.
4
Set depth
Check Through All, or uncheck and enter a specific depth.
5
Position the hole
Click on the face to place, or enter X/Y coordinates.
6
Apply
Click Apply or press Enter to create the hole.
Natural Language Alternatives
Instead of using the tool, you can type these commands:
Add a 0.25 inch hole in the center of the top faceCreate a through hole, 6mm diameterAdd a counterbore for an M5 socket head cap screwPut a 1/4" threaded hole 0.5 inches deep
Tips
- Use the drag handle to visually position holes on the face
- Standard sizes like #10 or M5 are available in the dropdown
- Counterbores and countersinks have additional depth and angle parameters