Pattern
Create rectangular or circular arrays of features
Overview
The Pattern tool creates multiple copies of features in a rectangular grid or circular arrangement. Use rectangular patterns for rows and columns, or circular patterns for features around a center point.
Parameters
| Parameter | Description | Default |
|---|---|---|
| Pattern Type | The arrangement style | Rectangular |
| X Count | Number of copies in X direction (rectangular) | 2 |
| X Spacing | Distance between copies in X (rectangular) | 1.0 in |
| Y Count | Number of copies in Y direction (rectangular) | 1 |
| Y Spacing | Distance between copies in Y (rectangular) | 1.0 in |
| Count | Number of copies around circle (circular) | 6 |
| Total Angle | Angular span for copies (circular) | 360° |
How to Use
1
Select a feature
Click on a hole, boss, or other feature to pattern.
2
Choose pattern type
Select Rectangular for grid or Circular for radial.
3
Set counts and spacing
Enter the number of copies and spacing for each direction.
4
Apply
Click Apply or press Enter to create the pattern.
Natural Language Alternatives
Instead of using the tool, you can type these commands:
Create a 3x3 pattern of holes with 1 inch spacingPattern this feature in a circle, 6 copiesMake a 2x4 grid of bosses, 0.5 inch spacingCircular pattern, 8 holes around the center
Tips
- Rectangular patterns create rows and columns
- Circular patterns are perfect for bolt circles
- Use 360° for full circles, or partial angles for arcs